|
It wasn’t too hard of an install, but I do recommend having the following on hand prior to the installation: It took about 2 hours total for the installation.
1. Good penetrating oil. 13 year old stock exhaust systems have very tight nuts.
2. Breaker bar, ratchet, 14mm socket, some extenstions and a closed 14mm wrench.
3. A floor jack and jack stands. Mechanix gloves, Eye protectants such as goggles.
4. If you want to replace the B-pipe to Cat gasket and locking nuts then order those from
Honda. as the Greddy only comes with a new gasket and bolts for the new muffler to the
new b-pipe. Also, depending on how old your car is, it might be a good idea to buy some
new rubber exhaust hangers. There are 5 of them on my car.
Disclaimer:
This is not meant as a complete installation guide. Please refer to a good Honda repair manual such as “Helm”. Also, be aware that anytime you work under a car it can be very dangerous. please take the proper safety precautions! Always use proper jack
stands. Last don’t blame me for any installation you do as I’m just an amateur like the rest of you out there, so install at your own risk ;o)
|
